Features:
Self-aligning ball bearings are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway. This construction allows the bearing to tolerate a small angular misalignment resulting from deflection or improper mounting. It is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected. Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.Self-Aligning Double Row Ball Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection. Standard Self-Aligning Double Row Ball Bearings are produced with straight bores; however, tapered bores are available upon request. Noteworthy is that the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds. Furthermore, the design allows for easy mounting and dismounting.Self-aligning ball bearings are widely used in such areas,such as :Transmission, gearboxes, wheel hubs ,Garden equipment ,Agricultural pumps ,Manufacturing ,General engineering applications ,Marine, shipping and paper and so on.
Self-aligning ball bearings can be divided into 3 series:
1200 Series – Can be misaligned 2.5°
1300 Series – Can be misaligned 3.0°
2200 Series – Can be misaligned 2.5° but has higher load ratings is and wider than the 1200 Series
self-aligning ball bearings are available in several designs, including:
1) basic design bearings
2) bearings with an extended inner ring
3) sealed bearings
Parameter:
Suffix and prefix means:
Suffixes – Internal design | Stands For |
---|---|
E | Optimized internal design |
Suffixes – External design (seals, snap ring groove etc.) | Stands For |
-2RS1 | Contact seal, NBR, on both sides |
K | Tapered bore, taper 1:12 |
Suffixes – Cage design | Stands For |
M | Machined brass cage, ball centred |
TN | PA66 cage, ball centred |
TN9 | Glass fibre reinforced PA66 cage, ball centred |
Suffixes – Accuracy, clearance, preload, quiet running | Stands For |
C2 | Radial internal clearance smaller than Normal |
C3 | Radial internal clearance greater than Normal |
Suffixes – Lubrication | Stands For |
W64 | Solid Oil |